Open Monday - Friday, excluding holidays. Call (323)690-2665
Instructions for DTF Transfers
1. Position Your Design
Position your transfer in the desired location and make sure you are not pressing over large wrinkles. Heat-resistant tape is recommended when pressing on hats or when using a household iron to prevent the transfer from moving. You'll learn when it's needed with experience.
2. Press
Press the transfer at 310°F / 155°C with medium to high pressure for ~13 seconds. It is always recommended to test one piece first. Use parchment paper or a Teflon Guard Sheet to protect your garment from touching the iron directly. You cannot damage the transfer by pressing with more heat, pressure, or time, however, it could scorch the garment. If your settings are scorching the garment, the first step would be to reduce pressure. If that doesn’t work, retain the reduced pressure and reduce the heat by 10-15°F. With a little practice, you’ll find the right settings for each garment and material.
3. Let it Cool, Then Peel
After pressing, let your transfer rest until it is cool to the touch (15-30 seconds). Peel slowly to ensure every piece of your design is adhering as you peel. We have a saying which is... don’t press with your hands, press with your EYES. This ensures every piece of your design is adhering to your item. If parts of the design are not sticking, lay it back down and
press again with added pressure and heat (+15°F). If unsuccessful, increase heat by 15°F increments until it works. Remember, the great thing about CSK Design Ink Transfers is that repeated pressing won't damage the transfer.
4. Final Press & Wash Instructions
Important: While the majority of other DTF companies advise you to press it just once, this is improper. After hundreds of wash tests, we have found that a final press is imperative to create a superior product.
After the design is transferred onto the garment, with the film peeled off, cover the design with provided parchment paper or a single layer of t-shirt material and press for ~15 seconds. By doing so, it enhances the value of your product by greatly improving the durability and softness as well as reducing the shine. For a glossy look, use a guard sheet for the second and final press instead. For best results and longevity, wash the garment inside out in cold water and dry on low heat or hang to dry. Washing it with standard settings is fine, but it lasts longer with more delicate settings.